Kllisre X79 motherboard LGA2011 ATX USB3.0 SATA3 PCI-E NVME M.2 SSD support REG ECC memory and Xeon E5 processor
Kllisre X79 DDR3 PC Desktops Motherboards 2011 CPU Computer 4 Channel Motherboard Feature: 1. Front and rear, dual USB 3.0 interface design, high-speed connection RTL8111F Gigabit Network card, dual indicator design,...
Kllisre X79 DDR3 PC Desktops Motherboards 2011 CPU Computer 4 Channel Motherboard
1. Front and rear, dual USB 3.0 interface design, high-speed connection RTL8111F Gigabit Network card, dual indicator design, stable and fast.
2. Four-channel memory, support common memory and ECC server memory, but can not be mixed at the same time.
3. Modular large heat dissipation power supply design, low temperature and high efficiency, multi-phase sharing, more stable, 8-phase power supply motherboard.
4. M.02 high-speed hard disk interface, convenient, high performance.
Main Chipset: for Intel B75/Q77/P75/H67 or others, send out by ramdomly.
Network Card Chip: Integrated RTL8111F Gigabit Network Card
Audio chip: integrated six-channel sound effect chip
CPU Platform: for Intel
CPU slot LGA: 2011
CPU support quantity: 1pc
Memory type: DDR3 1866/1600/1333 MHz
Memory slot: 4xDDR3 DIMM
2xPCI-E X16 graphics card slot
2xUSB3.0 pins (1 group)
4x USB 2.0 pins (2 groups)
1xNVME M.2 Interface
PS/2 Interface PS/2 Key Mouse General Interface
1xRJ45 Network Interface (Gigabit Network Card)
1x audio interface
Other: one 8-pin power socket, one 24-pin power socket, eight-phase power supply mode
Motherboard dimension: 220*280mm
Motherboard weight(including package): 1.5kg or so
Note: 1:The color of the bottom plate of the slot may vary from batch to batch, but it will not affect the use of the product. The product is constantly optimized and upgraded.
2:Please allow 1-3mm differs due to manual measurement.
3:Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
4:This planform needs powerful power supply. please make sure your power supply can enough to supports this planform.(at least 500w brand power supply)
5:The battery in motherboard photos will be removed before shipping, as battery is forbidden at CN post and custom
Dust or wipe clean with a cloth dampened with water once a week. Be sure not to leave water spots on the surface. These water spots will dry and could possibly leave permanent marks. Clean stains/spots using the following steps: Dampen a soft cloth with a mixture of hot water and liquid dishwashing detergent. Wring the cloth as much as possible to remove excess liquid. Rub the surface lightly in a circular motion. Dry the surface immediately with a clean, soft towel.