1Meter 1mm 2mm 3mm 4mm 6mm 8mm PTFE Tube For 3D Printer Parts Pipe Bowden J-head

€2,99

21448         Material: Teflon Color: white/black/red/blue/orange/transparent Temperature Range: -180 +260C Density: 2.10 2.30g/am3 Tensile Strength: >18Mpa Break Eongation: 230%   Teflon tube size:(ID=inner diameter,OD=outer diameter) ID1mm OD2mm ...

21448

 

Description

 

 

 

Material: Teflon
Color: white/black/red/blue/orange/transparent
Temperature Range: -180 +260C
Density: 2.10 2.30g/am3
Tensile Strength: >18Mpa
Break Eongation: 230%
 

Teflon tube size:(ID=inner diameter,OD=outer diameter)

ID1mm OD2mm  = inner diameter 1mm,outer diameter 2mm

ID1.5mm OD2.5mm  = inner diameter 1.5mm,outer diameter 2.5mm

ID2mm OD3mm = inner diameter 2mm,outer diameter 3mm

ID2mm OD4mm = inner diameter 2mm,outer diameter 4mm

ID3mm OD4mm = inner diameter 3mm,outer diameter 4mm

ID3mm OD6mm = inner diameter 3mm,outer diameter 6mm

ID4mm OD6mm = inner diameter 4mm,outer diameter 6mm

ID4.35mm OD6.35mm  = inner diameter 4.35mm,outer diameter 6.35mm

ID6mm OD8mm = inner diameter 6mm,outer diameter 8mm

 

 

 

Packing List

 

 

 

1 M PTFE Tube

Tips: we cut the tube depend on how many meters you order.If you buy 2 lots,you will get 1 single piece of teflon tube with 2 meter,and so on.

 

 

 

Display
  


 

Dust or wipe clean with a cloth dampened with water once a week. Be sure not to leave water spots on the surface. These water spots will dry and could possibly leave permanent marks. Clean stains/spots using the following steps: Dampen a soft cloth with a mixture of hot water and liquid dishwashing detergent. Wring the cloth as much as possible to remove excess liquid. Rub the surface lightly in a circular motion. Dry the surface immediately with a clean, soft towel.